Sunday, September 16, 2012

Make a Rainbow Makeup Brush Set with Matching Container

Recycle Baby Snack Containers into a Make Up Kit  

Step 1
Get your supplies, below are the ones I used.  I had some issues, so keep reading and I will discuss what you should use in order to get the best results with the least amount of effort.  Let me repeat "Best results with least amount of effort!" How all crafts should be.
You will need a primer or paints made for plastic.  This is discussed more in step 3, make sure to read that step
Step 2
Remove the label from you snack container


*Tip                                                                                               Important  that you pick a snack container that will hold your make up brushes well.









Step 3(the way I did it)
Tape and paint
You have to do some math to figure how many stripes will work with your container and the tape size your working with. *Tip- if you can't make the rows work out even with the size of your tape then work form middle out, leaving the top and bottom white.

The tape paint process.
(the way I did it)
After each stripe is taped off 
1) Remove every other row of tape then paint.  Let dry, repeat, let dry.(two coats)
2)Next if you have a good hand you can then remove the tape that is left on the container.  Then free hand paint the next set of "every other" unpainted stripe.(this is how I did it)
or
2)If you don't have a good hand at painting steady lines. Re-apply the tape(covering the now painted stripes) then remove the tape off the unpainted rows. Paint them... let dry and repeat.


That is how I did it but as promised I had some issues with this project, bad issues.  
What went wrong? My paint was not sticking well, actually it was a very huge disaster.  I am surprised I was able to make it work out. Every time I moved tape or even painted the paint pealed off.
Why?
I needed to use paint that was for plastic or prime this item!(with primer that works on plastic)

      STOP! READ THIS SO YOURS WILL WORK!
I don't want you to have to deal with the issues I had to make yours look good

You have options to avoid having my pealing paint issue.
(Your options are)
1.Use paint made for plastic(test a hidden area first)
2.Prime the area to be painted first,with a primer for plastic.(test hidden area first)
3.Eff the paint and use paper and Mod Podge for the stripes (this is what I wish I did)
So if you want to paint yours you need to do it different. You must prime it it okay? Or use paint made for plastic.   OK?Got it? Good. Then... moving on

Step 4

Seal it!
Paint it all over with a god coat of Mod Podge.  I like the Gloss look so that is what I used

When you apply the Mod Podge it will look foggy and white, have no fear it will dry nice and clear.

Step 5 Now take care of the brushes
Now you need to pay attention to your makeup brushes.  I wised up and primed my brushes.  Even thought they were wood, I figured better be safe and use the primer this time.

Okay then the same step apply to the makeup brushes.  One more time those steps are

1)Prime
2)Then Paint
3)Then Seal with the magic ingredient to crafting, Mod Podge!
Step 7 Dry time
I think this is the hardest step of all, also the most important.  They need to dry a long time until the mod podge is good and clear and hard. I can't tell you the exact time that it will be.  It depends on the temperature, humidity and some other things.  The minimum dry time for this project is going to be overnight.  For mine it  took about two days until everything was dry, hard and clear!



And then you are finished! You have some freshly painted makeup brushes and a nice little case you can toss in your bag.

Monday, September 10, 2012

How to Make a Sippy Cup

How to make a sippy cup for baby


See this monkey...  He loves water... A LOT!  He has a hard time drinking it

This is a shot and simple little DIY sippy cup tutorial  Fallow along and you can have a home made water bottle. for you monkey

He is kinda obsessed whit water.  I don't know why but since about 4 months he has had an obsession with water bottles and sippy cups.  We give him sippy cups but they end up getting tossed out the car window, over the side of the stroller, over the side of the toilet and any other place you can think of.  Don't ask me how the sippy cup gets in these situations but if you have a baby I am sure you know about this. 

When we are in public and the sippy cup is in a precarious situation and the monkey wants water we use to try to give him some out of our cups, water bottles and even our straws.  These methods work ok.  Then one day when we were trying to give him a sip out of one of our disposable water bottles his father had a brilliant idea.  I love his idea so much! It works so well and the Monkey absolutely loves it too!  So I am going to show you our little water bottle into a sippy cup invention.

Step 1 Get your supplies
1) disposable water bottle
2) Thumb Tack
3) Baby

Step 2 Poke Hole
Use your thumb tack to poke a single hole in the top center of the lid on your water bottle


That is! That is how easy it is to convert a water bottle into a quick sippy cup. This is great for at home or on trips.  You know how your normal sippy cup can often mysteriously vanish when out and about.

Look at my happy monkey drinking out of his new water bottle.  He can also hold it and suck the water out. He really like this because he feel more like us drinking out of a real water bottle.

And that is all it take to make a happy Monkey baby 
See
Happy Baby!

If you have a baby you know that you will pay anything to make them stop crying, all you need is a water bottle and thumb tack!

* SAFETY NOTE You should never leave a baby unattended with a water bottle with a cap as it posses a choking hazard. You should never leave a baby unattended at all. This item should always be used with adult supervision. This item should only be used if your Dr has approved that you baby can drink fluids other than breast milk. Breast is always best!  I am not responsible for anything that may happen to any one as a result of drinking water from a water bottle.

Sunday, September 9, 2012

How to Refashion a Night Gown into PJ's

How to Make This  Tank and Shorts Set From a Night Gown

Want to make this cute little PJ set?  Sure you do, because it it super easy and I am going to show you how.  Step by step with huge photos.  SO you hardly have to do anything, just scroll down this little blog page, look at the pretty pictures(well the color is actually really bad) and absorb all the info into your huge crafter brain.  Then grab an old OR thrifted night gown and CHOP IT UP!

So I made it out of a cute little night gown I got at the Goodwill.  I was excited at first when I found it because it was new and very soft.  The brand is "simply vera vera wang".   So I thought it was some expensive brand. I swooped it up for a few bucks not sure what I was going to do with it.  Now since I felt like a Kardashian, owning some Vera and all, I looked it up on line to see where this little number came from.  Well friends let me tell you, Khols was not what I was expecting.

Moving on from that embarrassing moment...  I am not really a night gown gal.  However I am TOTALLY a tank and short set gal.  So I figured why not fix it up so it is more my style? I know that is what Vera would have wanted.


Ok lets get started.

Step 1 Get your Supplies 
The first thing you need to do is get your supplies toghter and it is likely that you have them all at home right now... so what are you waiting for?  Oh yeah, the directions.
You will need a
1) Nightey
2) Waist band from old yoga pants
3) Basic sewing supplies
*TIP The fabric that I used on this project did not need to be "finished" to keep from unraveling and/or fraying.  I used a cotton with a little spandex(T-shirt type fabric).   My tutorial is for this type of fabric.  If you want to work with something else then you will need to finish the edges in a different way than I did as well as leaving a seam allowance to hem the bottom of the tank
Step 2 Measure

The way that I like to measure this type of project is very easy and it works on all types of sewing and refashioning projects.  This is another example of how I used this same way to measure a refashion. Since I want to make this gown into a tank top and short set, I used a tank top and pair of shorts I own that fit in a way that I like.

To take the measurements place the top and bottom(that fit) on top of the gown. Another example

Step 3 Pin and Chalk
With your sewing pins and chalk mark in between your top and shorts where you want to make your cut
Step 4 Make your cut
Cut along the chalk line(its hard to see in this photo)

After you make the cut you will have a "top" piece and a "bottom" piece that looks like a skirt.  I am leaving my top as is(with out hemming it); so the top is done!  Now I only need to make the bottom portion into shorts rather than a scarp of fabric.
Step 6 Get a new waist band
I used a waist band of some old yoga pants.  So I just chopped the waist band of the old yoga pants. Make sure to save the pants for a future refashion.
Step 7 Pin and Stitch
Pin the new waist band, to the bottom portion of the gown.  (The part that dose not look like a tank top)  The bottom piece was(and should be) much wider then the new waist band so I pinned folds into it that will give a slight gathered or pleated look.

I wanted to leave raw edges on the waist band because I love that look and how that fabric will curl up when left this way.  To do this I pinned the gown fabric on top of the waist band fabric, right sides down.

You could fold it under to give a clean finished look, if you like that look more.

After its all pined then stitch with a zig-zag stitch with your machine or by hand if you must,(YUCK)

This is how it will look after the waistband is stitched to the bottom section of the gown. To give the raw edges that "curled" look, just pull on the fabric to stretch it for a few seconds and it will curl under on its own. I did not stitch too close to the edge so that some of the fabric will curl under.  If I would have stitched right along the bottom then stitching would be viable and not curl up like it did.
Step 8 Make Shorts
Ok this is how you make the skirt into shorts.  Fold the skirt in half and make a cut down the center.  I had a section of silk fabric and decided to make my short legs as long as the silk.  You will have to do what is best for your size. Then unfold and you will have a skirt with a slit down the center.
Then pin and stitch the legs shut to create the shorts.

TA-DA! this is how mine looked.  I just LOVE how they turned out!  I folded the yoga waist band down, but it can be worn up as well.

*NOTE You can see where I pressed the fabric before I stitched it and how that created slight pleats in my new shorts.  It also made the fabric color look funny, but that will go away after I wash the shorts.

The whole set is so cute.  I am very happy with how this refashion worked out,  I have already worn it a few times.

So are you going to try and make this? let me know if you do I would love to see pictures of how your night night set worked out.  Thank you so much for looking at my Refashion today.  I would love to know what you think.